Mostly blank white image with a black horizontal bar along the bottom edge

Foam System Inspection

Prove Your Foam System Works – Without Leaking Foam

RoyalTech Group is the exclusive provider of the FM-approved NoFoam FixpipeTM system in Eastern Canada. Using ultrasonic technology, we verify the performance of your foam suppression systems while eliminating any leakage, ensuring a compliant, eco-friendly inspection without prolonged downtime.

What the Authorities Require

  • Accurate dosing
  • No damage to the system
  • Environmental compliance
Logo indiquant « NoFoam FixPipe™ » en caractères verts stylisés, avec le texte français en dessous indiquant « Essai du proportionneur sans mousse ».
Workers in hard hats near fire safety signs and emergency exit in an industrial setting

The Solution: NoFoam Fixpipe™

NoFoam FixPipe logo in green text on a white background

Inspect your foam suppression systems without leakage or discharge into the environment.


  • Ultrasonic technology (FlowBase)
  • Zero foam discharge
  • Auditable data
  • Accelerated return to service
  • Measurable results without foam 
  • 3.1% concentration (in real time)

Protect your systems. Protect the environment. Protect your company.

Industry standards are changing: verify your foam systems without discharge

NoFoam FixPipe logo in green text on a white background

NoFoam FixpipeTM is the world’s only FM-approved proportional verification system for ultrasonic flow-based testing without foam discharge.

Traditional Test With Foam

White foam or snow covering an industrial warehouse floor with red posts and ceiling pipes

Foam-Free Test

Two workers beside red hoses pumping water across a wet industrial site

4 Benefits of the NoFoam FixpipeTM (FlowBase) Ultrasonic System

NoFoam FixPipe logo in green text on a white background

  • 1. Verified Accuracy and Compliance With Standards and Guidelines

    • Confirms the ideal concentration under real-world flow and pressure conditions
    • FM Approval
    • NFPA-compliant methodology
    • FAA AC 150/32100-6 compliance

  • 2. Elimination of Any Risk of Environmental Liability

    • No foam discharge
    • No AFFF/F3 mixing
    • Tests without consuming your concentrate
    • No hazardous waste

  • 3. Accelerated Return to Service

    • No harmful mixtures
    • Rapid return to operation
    • Minimal downtime for your facilities

  • 4. Compliant Data for Audits and Insurers

    • Actual measured data (GPM and % concentration)
    • Traceable, exportable reports (PDF)
    • Certifiable reports for AHJ, insurers, and other authorities
White foam or snow covering an industrial warehouse floor with red posts and ceiling pipes

NoFoam FixpipeTM : Full Compliance

Extinguishers With Charge of ≤ 60 kg NoFoam FixpipeTM 006
Foam discharge None
PFAS containment cost None
AFFF + F3 mixture None
System contamination None
Environmental impact None

Schedule an assessment with our specialists to verify the compliance of your foam suppression system.

Small group gathered around a wheeled equipment rack in a workshop, discussing a machine with cables and monitors.

Download our documents

Foam System Inspection FAQ

  • Why inspect a foam system without discharging foam?

    Traditional inspection methods require the actual discharge of AFFF or F3 foam, which creates several problems: costly consumption of your concentrate, production of hazardous waste requiring disposal, risks of environmental contamination, and prolonged downtime for your facilities.

     

    With the NoFoam Fixpipe™, you achieve measurable results that meet regulatory requirements while eliminating these constraints. It is a solution that is both more responsible and more cost-effective.

  • Is the NoFoam Fixpipe™ compliant with NFPA standards and other regulations?

    Yes. The NoFoam Fixpipe™ methodology complies with NFPA requirements and is FM (Factory Mutual) approved. The system also complies with FAA AC 150, making it particularly suitable for airport facilities and aviation hangars.

     

    The reports generated are certifiable and accepted by AHJs (Authorities Having Jurisdiction), insurers, and other relevant authorities.

  • What types of facilities can benefit from this inspection?

    The NoFoam Fixpipe™ is designed for any facility equipped with a foam suppression system. This includes aviation hangars, hazardous materials warehouses, industrial and petrochemical facilities, oil terminals, and loading platforms.


    If your building is equipped with a foam system, there is a good chance this technology can be applied to your situation. Contact us for an assessment.

  • How long does it take to return to service after a NoFoam Fixpipe™ inspection?

    This is one of the system’s major advantages. Since no concentrate is consumed and no residue remains in the piping, return to service is significantly faster than with traditional methods. No cleaning is required, no harmful mixtures need to be flushed out, and no concentrate needs to be replaced. 


    Downtime for your facilities is therefore minimized, which is particularly advantageous for environments with continuous operations.

  • Why choose Groupe Royaltech for the inspection of your foam systems?

    Groupe Royaltech is the exclusive supplier of FM-approved NoFoam Fixpipe™ in Eastern Canada. Our team of qualified inspectors is highly skilled in this technology and supports you from the initial assessment through to the delivery of certifiable reports.


    We also offer 24/7 emergency service and scheduling tailored to your operations to minimize disruptions. Contact us for a free quote.

Groupe Royaltech offers a range of turnkey services for building security.

A visit, a plan of your building, the expected time frame, and voilà.